Scientists Create New Plastic that Could Be Fully Recyclable

2019-05-13

00:00 / 00:00
复读宝 RABC v8.0beta 复读机按钮使用说明
播放/暂停
停止
播放时:倒退3秒/复读时:回退AB段
播放时:快进3秒/复读时:前进AB段
拖动:改变速度/点击:恢复正常速度1.0
拖动改变复读暂停时间
点击:复读最近5秒/拖动:改变复读次数
设置A点
设置B点
取消复读并清除AB点
播放一行
停止播放
后退一行
前进一行
复读一行
复读多行
变速复读一行
变速复读多行
LRC
TXT
大字
小字
滚动
全页
1
  • Plastic remains one of the most-used materials for making many of the things we use in our everyday lives.
  • 2
  • Things made of plastic can be very strong and last a long time.
  • 3
  • They also do well in extreme heat and cold.
  • 4
  • Plastic is also much lighter than metal and can easily be formed into different shapes.
  • 5
  • This makes the material ideal for countless uses across many different industries.
  • 6
  • But the widespread use of plastics across the world is causing major problems for the environment.
  • 7
  • Plastic material is flooding landfills and causing severe damage in the world's oceans.
  • 8
  • Plastics can take hundreds of years to break down on their own.
  • 9
  • Very few kinds are highly recyclable.
  • 10
  • This is because of the way plastics are formed.
  • 11
  • It has been estimated that even the most reusable kinds of plastic can only be recycled at a rate of 20 to 30 percent.
  • 12
  • Even when recycling is possible, the process is costly, can use a lot of energy and, in many cases, produces poor-quality materials.
  • 13
  • But a team of researchers working at the U.S. Department of Energy says it has created a kind of plastic that could lead to products that are 100 percent recyclable.
  • 14
  • The team works at the Department of Energy's Lawrence Berkeley National Laboratory in California.
  • 15
  • It recently reported the discovery in a study in the journal Nature Chemistry.
  • 16
  • The researchers say the new material is a plastic polymer called polydiketoenamine, or PDK.
  • 17
  • The team reports that the material can be broken down in parts at the molecular level.
  • 18
  • It can then be built up again to form plastics of different shapes, textures, colors and more.
  • 19
  • The researchers say this process can be repeated over and over again -- without the plastic material losing any performance or quality.
  • 20
  • "Most plastics were never made to be recycled," lead researcher Peter Christensen said in a statement.
  • 21
  • Christensen works at Berkeley Lab's Molecular Foundry center.
  • 22
  • "But we have discovered a new way to assemble plastics that takes recycling into consideration from a molecular perspective."
  • 23
  • The team explained that all plastics - from water bottles to automobile parts - are made up of polymers with a molecular structure.
  • 24
  • These polymers are made up of carbon-containing compounds known as monomers.
  • 25
  • Many plastics have different chemicals added to them to make them more useful and powerful.
  • 26
  • The problem is that these chemicals attach to the monomers,
  • 27
  • which remain in the plastics even after the material gets processed at a recycling plant.
  • 28
  • The research team reported that, with the newly discovered PDK material, the monomers could be recovered and separated from any chemical additives.
  • 29
  • This part of the process would involve putting the plastic material into "a highly acidic solution."
  • 30
  • Brett Helms is a scientist at Berkeley Lab's Molecular Foundry who worked on the study.
  • 31
  • He said the team is interested in the chemistry that can redirect plastic lifecycles from "linear to circular."
  • 32
  • This could be especially important for materials that currently have very few recycling possibilities, he added.
  • 33
  • Next, the researchers say they plan to develop PDK plastics "with a wide range of thermal and mechanical properties."
  • 34
  • These plastics could be used for many kinds of cloth, as well as things such as 3D printed materials and foams.
  • 35
  • In addition, the team is looking to include plant-based materials in the process.
  • 36
  • Helms said the world is currently "at a critical point," at which new recycling plants and processes need to be developed and modernized to deal with long-lasting plastic waste.
  • 37
  • New recycling centers could be designed to recycle or upcycle PDK and related plastics.
  • 38
  • "Then we would be able to more effectively divert plastic from landfills and the oceans," Helms said.
  • 39
  • "This is an exciting time to start thinking about how to design both materials and recycling facilities to enable circular plastics," he added.
  • 40
  • I'm Bryan Lynn.
  • 1
  • Plastic remains one of the most-used materials for making many of the things we use in our everyday lives.
  • 2
  • Things made of plastic can be very strong and last a long time. They also do well in extreme heat and cold. Plastic is also much lighter than metal and can easily be formed into different shapes. This makes the material ideal for countless uses across many different industries.
  • 3
  • But the widespread use of plastics across the world is causing major problems for the environment. Plastic material is flooding landfills and causing severe damage in the world's oceans.
  • 4
  • Plastics can take hundreds of years to break down on their own. Very few kinds are highly recyclable. This is because of the way plastics are formed.
  • 5
  • It has been estimated that even the most reusable kinds of plastic can only be recycled at a rate of 20 to 30 percent. Even when recycling is possible, the process is costly, can use a lot of energy and, in many cases, produces poor-quality materials.
  • 6
  • But a team of researchers working at the U.S. Department of Energy says it has created a kind of plastic that could lead to products that are 100 percent recyclable.
  • 7
  • The team works at the Department of Energy's Lawrence Berkeley National Laboratory in California. It recently reported the discovery in a study in the journal Nature Chemistry.
  • 8
  • The researchers say the new material is a plastic polymer called polydiketoenamine, or PDK. The team reports that the material can be broken down in parts at the molecular level.
  • 9
  • It can then be built up again to form plastics of different shapes, textures, colors and more. The researchers say this process can be repeated over and over again -- without the plastic material losing any performance or quality.
  • 10
  • "Most plastics were never made to be recycled," lead researcher Peter Christensen said in a statement. Christensen works at Berkeley Lab's Molecular Foundry center. "But we have discovered a new way to assemble plastics that takes recycling into consideration from a molecular perspective."
  • 11
  • The team explained that all plastics - from water bottles to automobile parts - are made up of polymers with a molecular structure. These polymers are made up of carbon-containing compounds known as monomers.
  • 12
  • Many plastics have different chemicals added to them to make them more useful and powerful. The problem is that these chemicals attach to the monomers, which remain in the plastics even after the material gets processed at a recycling plant.
  • 13
  • The research team reported that, with the newly discovered PDK material, the monomers could be recovered and separated from any chemical additives. This part of the process would involve putting the plastic material into "a highly acidic solution."
  • 14
  • Brett Helms is a scientist at Berkeley Lab's Molecular Foundry who worked on the study. He said the team is interested in the chemistry that can redirect plastic lifecycles from "linear to circular." This could be especially important for materials that currently have very few recycling possibilities, he added.
  • 15
  • Next, the researchers say they plan to develop PDK plastics "with a wide range of thermal and mechanical properties." These plastics could be used for many kinds of cloth, as well as things such as 3D printed materials and foams. In addition, the team is looking to include plant-based materials in the process.
  • 16
  • Helms said the world is currently "at a critical point," at which new recycling plants and processes need to be developed and modernized to deal with long-lasting plastic waste. New recycling centers could be designed to recycle or upcycle PDK and related plastics.
  • 17
  • "Then we would be able to more effectively divert plastic from landfills and the oceans," Helms said. "This is an exciting time to start thinking about how to design both materials and recycling facilities to enable circular plastics," he added.
  • 18
  • I'm Bryan Lynn.
  • 19
  • Bryan Lynn wrote this story for VOA Learning English, based on a report from Nature and online sources. Ashley Thompson was the editor.
  • 20
  • We want to hear from you. Write to us in the Comments section, and visit our Facebook page.
  • 21
  • ________________________________________________________________
  • 22
  • Words in This Story
  • 23
  • ideal - adj. perfect, of the best choice possible
  • 24
  • polymer - n. a natural or artificial substance made from many smaller molecules
  • 25
  • texture - n. the way something feels then you touch it
  • 26
  • assemble - v. to build or put together
  • 27
  • perspective - n. way of thinking about or looking at something
  • 28
  • thermal - adj. relating to heat
  • 29
  • foam - n. lightweight material produced from a chemical process
  • 30
  • divert - v. send something somewhere different from where it was expected to go
  • 31
  • enable - v. make something possible